1.4301 301 Stainless Steel Strip Cold Rolled Flexible Steel Strips For Flexible Hoses

301 /1.4301 Cold Rolled Stainless Steel Strips For Flexible Hoses

Introduction​:

Strip steels are manufactured by hot rolling to thicknesses not less than 2 mm, and then finally cold rolled to the required final thickness. Since cold forming (e.g. by deep drawing, stretch forming or bending) is a widely used application for low-carbon strip steels, a final recrystallization anneal is applied.

​

Cold rolled stainless steel strip is made of hot rolled stainless steel strip as blank and further cold rolled. Compared with the hot rolled strip, it has higher dimensional accuracy, lower surface roughness, better surface quality, smooth, and higher strength. Therefore, the thinner cold-rolled strip can replace the thicker hot-rolled strip for the same purpose to save the amount of steel, which is of great economic significance.

Description

Applications:

It is suitable for electrical appliances, stainless steel kitchenware, hardware products, ground springs, sanitary ware, chemical industry, petroleum, pipe making, cable wrapping, medical treatment, bending and flanging, mechanical equipment manufacturing, construction decoration and other industries. Hard state is suitable for electronics, electrical appliances, computers, high-tech product parts, adjusting gaskets, metal stamping parts spring shrapnel and other stainless steel industries.

Manufacturing Processes:

• Raw material
• Cold rolling
• Degreasing
• Bright annealing
• Tension levelling
• Slitting
• Packing
• Checking

Packaging: